Wondering if anyone has researched and or successfully converted some sort of non trials mtb 26" frame to a streety trials bike. Something with a long-ish top tube, 0drop bb or so, short stays, low front end like 60-80mm fork and rear disc.
I purchased a heatsink tensioner for my Hex, replacing the Trialtech two wheeled tensioner I have been using for years. I now have more chain than I would like hanging down. I am a half link away from being able to shorten any further and would like to use a half link. This is where it gets confusing, I have never done this before and have read on every chain description on Tartybikes that the split link that comes with every chain sold is not recommended for trials use. There are no alternatives given. I have read that people just push a link pin out enough to remove the required links and push the partially removed pin back in. This makes me uncomfortable. If I was to use a half link I would have to do this twice or, I would have to use two split links which is not recommended for trials use by Tartybikes to put the chain together. Both options sound sketchy to me. Can someone with experiential knowledge and experience please explain how I can use a half link without compromising the chains integrity so I won't worry about my chain snapping on every drop?! Split link image provided for those who may not know what it is.